Asbestos removal companies

ð High standard Security

ð Increasing productivity per square meter

The amount of ATP Sol lies between 200 and 500 grams of product per square meter, depending on the spraying layer thickness. In that way, It adds a mass between 100 and 250 grams of "dry" per square meter.

However, the asbestos mass per m2 is highly variable depending on each buildings to treat.

Benefits

1) Dust low production during the scraping

2) Spraying recovery through large sizes blocks, easier to recover and put in big bags

3) The density of asbestos composite / ATP Sol is higher than that the floc pure one, hence a better filling in big bags. (800 - 900 kg / cubic metre, against 400 - 500 kg / cubic meter for spraying only)

4) The waste weight is more important (asbestos + ATP Sol sec), which can be estimated at 15 - 20% more.

Carrier & storekeeper

ð Transport higher productivity

ð Fewer trucks

ð Less rotation

For the carrier or the storekeeper, ATP Sol impact is valued in terms by improving the productivity of transport through the effect on the densification of the product.